Abtronhttp://www.abtron.com.br/Componentes Eletrônicos - São Paulo - SPpt-brabtron@abtron.com.br(Abtron)DS12887http://www.abtron.com.br/produtos/0,14412_DS12887.html
]]>MCM6810Shttp://www.abtron.com.br/produtos/0,15595_MCM6810S.html
]]>CAPACITOR TANTALO 10MF/25V EPOXIhttp://www.abtron.com.br/produtos/0,14440_CAPACITOR-TANTALO-10MF-25V-EPOXI.html
]]>CI UC3842http://www.abtron.com.br/produtos/0,14439_CI-UC3842.html
]]>CI TP3070 - SMDhttp://www.abtron.com.br/produtos/0,14438_CI-TP3070-SMD.html
]]>CAPACITOR 220MF/16V SMD 1206http://www.abtron.com.br/produtos/0,14437_CAPACITOR-220MF-16V-SMD-1206.html
]]>CI TS5070 - SMDhttp://www.abtron.com.br/produtos/0,14436_CI-TS5070-SMD.html
]]>TRANSISTOR 1AY SMDhttp://www.abtron.com.br/produtos/0,14435_TRANSISTOR-1AY-SMD.html
]]>CI L8575BP SMDhttp://www.abtron.com.br/produtos/0,14434_CI-L8575BP-SMD.html
]]>SMD- BAS16LT1http://www.abtron.com.br/produtos/0,14432_SMD-BAS16LT1.html
]]>CI CFK2162-P5http://www.abtron.com.br/produtos/0,14431_CI-CFK2162-P5.html
]]>CA3524E RCAhttp://www.abtron.com.br/produtos/0,14430_CA3524E-RCA.html
]]>SN74LS155ANhttp://www.abtron.com.br/produtos/0,14429_SN74LS155AN.html
]]>MT8870DEhttp://www.abtron.com.br/produtos/0,14428_MT8870DE.html
]]>AM7905ADChttp://www.abtron.com.br/produtos/0,14427_AM7905ADC.html
]]>SN74LS00Nhttp://www.abtron.com.br/produtos/0,14426_SN74LS00N.html
]]>74LS00PChttp://www.abtron.com.br/produtos/0,14425_74LS00PC.html
]]>HD74LS375Phttp://www.abtron.com.br/produtos/0,14424_HD74LS375P.html
]]>SN74HC273Nhttp://www.abtron.com.br/produtos/0,14423_SN74HC273N.html
]]>CAPACITOR 1MF 63Vhttp://www.abtron.com.br/produtos/0,14421_CAPACITOR-1MF-63V.html
]]>CAPACITOR 105J 630V MPPhttp://www.abtron.com.br/produtos/0,14420_CAPACITOR-105J-630V-MPP.html
]]>CAPACITOR AXIAL 1000MF 40Vhttp://www.abtron.com.br/produtos/0,14419_CAPACITOR-AXIAL-1000MF-40V.html
]]>224J 250Vhttp://www.abtron.com.br/produtos/0,14418_224J-250V.html
]]>4M7 100Vhttp://www.abtron.com.br/produtos/0,14417_4M7-100V.html
]]>47MF 50Vhttp://www.abtron.com.br/produtos/0,14415_47MF-50V.html
]]>74ALS245ANhttp://www.abtron.com.br/produtos/0,14413_74ALS245AN.html
3-State Octal Bus Transceiver

Características:

Semi condutor Plastico 20 Pinos Dip]]>X28C512P-15http://www.abtron.com.br/produtos/0,14411_X28C512P-15.html
]]>GD4066Bhttp://www.abtron.com.br/produtos/0,14410_GD4066B.html
]]>SN74LS86ANhttp://www.abtron.com.br/produtos/0,14385_SN74LS86AN.html
]]>SN74S280Nhttp://www.abtron.com.br/produtos/0,14384_SN74S280N.html
]]>22MF 50Vhttp://www.abtron.com.br/produtos/0,14383_22MF-50V.html
]]>4M7 100Vhttp://www.abtron.com.br/produtos/0,14381_4M7-100V.html
]]>22MF 50Vhttp://www.abtron.com.br/produtos/0,14378_22MF-50V.html
]]>LM358Nhttp://www.abtron.com.br/produtos/0,14377_LM358N.html
Dual O Amplificador Operacional Da Geral-Finalidade]]>AM27C256http://www.abtron.com.br/produtos/0,14372_AM27C256.html
The Microchip Technology Inc. 27C256 is a CMOS. 256K bit electrically Programmable Read Only Memory. (EPROM). The device is organized as 32K words by 8

Características:

The Microchip Technology Inc. 27C256 is a CMOS. 256K bit electrically Programmable Read Only Memory. (EPROM). The device is organized as 32K words by 8]]>74LS259Nhttp://www.abtron.com.br/produtos/0,14371_74LS259N.html
]]>68MF 16Vhttp://www.abtron.com.br/produtos/0,14370_68MF-16V.html
]]>CI SG3525ANhttp://www.abtron.com.br/produtos/0,14369_CI-SG3525AN.html
]]>74HCT4075Nhttp://www.abtron.com.br/produtos/0,14368_74HCT4075N.html
74HCT4075, Texas Instruments, High Speed CMOS Logic Triple 3-Input OR Gate, 32.07 Kb, ...... First line: 4046a 74HCT4046A CI 4059 74HCT9046AD Abstract:]]>74HC125D SMD 14Phttp://www.abtron.com.br/produtos/0,14367_74HC125D-SMD-14P.html
]]>DM7442Nhttp://www.abtron.com.br/produtos/0,14366_DM7442N.html
TTL dip]]>47MF 50Vhttp://www.abtron.com.br/produtos/0,14365_47MF-50V.html
Capacitor Eletrolitico radial, 85º]]>M 27C256-10http://www.abtron.com.br/produtos/0,14364_M-27C256-10.html
]]>27C010A -12http://www.abtron.com.br/produtos/0,14363_27C010A-12.html
Features
· Fast Read Access Time - 45 ns · Low Power CMOS Operation
100 mA max. Standby
25 mA max. Active at 5 MHz (AT27C010L)
35 mA max. Active at 5 MHz (AT27C010) · JEDEC Standard Packages
32-Lead 600-mil PDIP
32-Lead PLCC
32-Lead TSOP · 5V ± 10% Supply · High Reliability CMOS Technology
2000V ESD Protection
200 mA Latchup Immunity · RapidÔ Programming Algorithm - 100 ms/byte (typical) · CMOS and TTL Compatible Inputs and Outputs · Integrated Product Identification Code · Commercial and Industrial Temperature Ranges

Características:

AT27C010/L
Description
The AT27C010/L is a low-power, high performance 1,048,576 bit one-time programmable
read only memory (OTP EPROM) organized as 128K by 8 bits. They require
only one 5V power supply in normal read mode operation. Any byte can be accessed
in less than 45 ns, eliminating the need for speed reducing WAIT states on high performance
microprocessor systems.
Two power versions are offered. In read mode, the AT27C010 typically consumes 25
mA while the AT27C010L requires only 8 mA. Standby mode supply current for both
parts is typically less than 10 mA.
(continued)
Pin Configurations
Pin Name Function
A0 - A16 Addresses
O0 - O7 Outputs
CE Chip Enable
OE Output Enable
PGM Program Strobe
NC No Connect
1 Megabit
(128K x 8)
OTP
CMOS EPROM
PDIP Top View
PLCC Top View
Features
· Fast Read Access Time - 45 ns · Low Power CMOS Operation
100  mA max. Standby
25 mA max. Active at 5 MHz (AT27C010L)
35 mA max. Active at 5 MHz (AT27C010) · JEDEC Standard Packages
32-Lead 600-mil PDIP
32-Lead PLCC
32-Lead TSOP · 5V ±  10% Supply · High Reliability CMOS Technology
2000V ESD Protection
200 mA Latchup Immunity · RapidÔ Programming Algorithm - 100 ms/byte (typical) · CMOS and TTL Compatible Inputs and Outputs · Integrated Product Identification Code · Commercial and Industrial Temperature Ranges
TSOP Top View
Type 1
0321I
AT27C010/L
3-153
System Considerations
The AT27C010/L in available in a choice of industry standard
JEDEC-approved one-time programmable (OTP)
plastic PDIP, PLCC, and TSOP packages. All devices feature
two line control (CE, OE) to give designers the flexibility
to prevent bus contention.
With 128K byte storage capability, the AT27C010/L allows
firmware to be stored reliably and to be accessed by the
system without the delays of mass storage media.
Atmel’s 27C010/L have additional features to ensure high
quality and efficient production use. The RapidÔProgramming
Algorithm reduces the time required to program the
part and guarantees reliable programming. Programming
time is typically only 100 ms/byte. The Integrated Product
Identification Code electronically identifies the device and
manufacturer. This feature is used by industry standard
programming equipment to select the proper programming
algorithms and voltages.
Description (Continued)
Switching between active and standby conditions via the
Chip Enable pin may produce transient voltage excursions.
Unless accommodated by the system design, these
transients may exceed data sheet limits, resulting in device
non-conformance. At a minimum, a 0.1 mF high frequency,
low inherent inductance, ceramic capacitor
should be utilized for each device. This capacitor should
be connected between the VCC and Ground terminals of
the device, as close to the device as possible. Additionally,
to stabilize the supply voltage level on printed circuit
boards with large EPROM arrays, a 4.7 mF bulk electrolytic
capacitor should be utilized, again connected between the
VCC and Ground terminals. This capacitor should be positioned
as close as possible to the point where the power
supply is connected to the array.
3-154 AT27C010/L
Block Diagram
Temperature Under Bias ................ -55°C to +125°C
Storage Temperature...................... -65°C to +150°C
Voltage on Any Pin with
Respect to Ground......................... -2.0V to +7.0V (1)
Voltage on A9 with
Respect to Ground ...................... -2.0V to +14.0V (1)
VPP Supply Voltage with
Respect to Ground....................... -2.0V to +14.0V (1)
*NOTICE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only and functional operation of the
device at these or any other conditions beyond those indicated
in the operational sections of this specification is not
implied. Exposure to absolute maximum rating conditions
for extended periods may affect device reliability.
Note: 1. Minimum voltage is -0.6V dc which may undershoot
to -2.0V for pulses of less than 20 ns. Maximum output
pin voltage is VCC + 0.75V dc which may overshoot
to +7.0V for pulses of less than 20 ns.
Absolute Maximum Ratings*
Operating Modes
Mode \ Pin CE OE PGM Ai VPP Outputs
Read VIL VIL X (1) Ai X DOUT
Output Disable X VIH X X X High Z
Standby VIH X X X X High Z
Rapid Program (2) VIL VIH VIL Ai VPP DIN
PGM Verify VIL VIL VIH Ai VPP DOUT
PGM Inhibit VIH X X X VPP High Z
Product Identification (4) VIL VIL X
A9 = VH
(3)
A0 = VIH or VIL
A1 - A16 = VIL
X Identification
Code
Notes: 1. X can be VIL or VIH.
2. Refer to Programming characteristics.
3. VH = 12.0 ± 0.5V.
4. Two identifier bytes may be selected. All Ai inputs
are held low (VIL), except A9 which is set to VH and A0
which is toggled low (VIL) to select the Manufacturer’s Identification
byte and high (VIH) to select the Device Code byte.
AT27C010/L
3-155
AC Characteristics for Read Operation
AT27C010 / AT27C010L
-45 -55 -70 -90 -12 -15
Symbol Parameter Condition Min Max Min Max Min Max Min Max Min Max Min Max Units
tACC (3) Address to
Output Delay
CE = OE
= VIL
45 55 70 90 120 150 ns
tCE (2) CE to Output Delay OE = VIL 45 55 70 90 120 150 ns
tOE (2, 3) OE to Output Delay CE = VIL 20 25 30 35 35 40 ns
tDF (4, 5) OE or CE High to
Output Float, whichever occurred first 20 20 25 25 30 35 ns
tOH
Output Hold from
Address, CE or OE,
whichever occurred first
7 7 7 0 0 0 ns
Notes: 2, 3, 4, 5. - see AC Waveforms for Read Operation.
DC and AC Operating Conditions for Read Operation
AT27C010 / AT27C010L
-45 -55 -70 -90 -12 -15
Operating
Temp. (Case)
Com. 0°C - 70°C 0°C - 70°C 0°C - 70°C 0°C - 70°C 0°C - 70°C 0°C - 70°C
Ind. -40°C - 85°C -40°C - 85°C -40°C - 85°C -40°C - 85°C -40°C - 85°C -40°C - 85°C
VCC Supply 5V ± 10% 5V ± 10% 5V ± 10% 5V ± 10% 5V ± 10% 5V ± 10%
DC and Operating Characteristics for Read Operation
Symbol Parameter Condition Min Max Units
ILI Input Load Current VIN = 0V to VCC ±1 mA
ILO Output Leakage Current VOUT = 0V to VCC ±5 mA
IPP1
(2) VPP
(1) Read/Standby Current VPP = VCC 10 mA
ISB VCC
(1) Standby Current
ISB1 (CMOS), CE = VCC ± 0.3V 100 mA
ISB2 (TTL), CE = 2.0 to VCC + 0.5V 1 mA
ICC VCC Active Current f = 5 MHz, IOUT = 0 mA,
CE = VIL
AT27C010L 25 mA
AT27C010 35 mA
VIL Input Low Voltage -0.6 0.8 V
VIH Input High Voltage 2.0 VCC + 0.5 V
VOL Output Low Voltage IOL = 2.1 mA 0.4 V
VOH Output High Voltage IOH = -400 mA 2.4 V
Notes: 1. VCC must be applied simultaneously or before VPP,
and removed simultaneously or after VPP.
2. VPP may be connected directly to VCC, except during programming.
The supply current would then be the sum of ICC and IPP.
3-156 AT27C010/L
Pin Capacitance (f = 1 MHz, T = 25°C) (1)
Typ Max Units Conditions
CIN 4 8 pF VIN = 0V
COUT 8 12 pF VOUT = 0V
Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.
AC Waveforms for Read Operation (1)
Notes: 1. Timing measurement reference level is 1.5V for -45
and -55 devices. Input AC drive levels are VIL =
0.0V and VIH = 3.0V. Timing measurement reference
levels for all other speed grades are VOL =
0.8V and VOH = 2.0V. Input AC drive levels are VIL
= 0.45V and VIH = 2.4V.
2. OE may be delayed up to tCE - tOE after the falling
edge of CE without impact on tCE.
3. OE may be delayed up to tACC - tOE after the address is valid
without impact on tACC.
4. This parameter is only sampled and is not 100% tested.
5. Output float is defined as the point when data is no longer
driven.
Input Test Waveforms and Measurement Levels
tR, tF < 5 ns (10% to 90%)
For -45 and -55 devices
only:
For -70, -90, -12, -15,
and -20 devices:
Output Test Load
Note: CL = 100 pF including
jig capacitance, except for the
-45 and -55 devices, where
CL= 30 pF.
tR, tF < 20 ns (10% to 90%)
AT27C010/L
3-157
Programming Waveforms (1)
Notes: 1. The Input Timing Reference is 0.8V for VIL and
2.0V for VIH.
2. tOE and tDFP are characteristics of the device but
must be accommodated by the programmer.
3. When programming the AT27C010/L, a 0.1 mF capacitor is
required across VPP and ground to suppress spurious voltage
transients.
DC Programming Characteristics
TA = 25 ± 5°C, VCC = 6.5 ± 0.25V, VPP = 13.0 ± 0.25V
Symbol Parameter
Test
Conditions
Limits
Min Max Units
ILI Input Load Current VIN = VIL, VIH ±10 mA
VIL Input Low Level -0.6 0.8 V
VIH Input High Level 2.0 VCC + 1 V
VOL Output Low Voltage IOL = 2.1 mA 0.4 V
VOH Output High Voltage IOH = -400  mA 2.4 V
ICC2
VCC Supply Current
(Program and Verify) 40 mA
IPP2
VPP Supply
Current CE = PGM = VIL 20 mA
VID A9 Product Identification Voltage 11.5 12.5 V
3-158 AT27C010/L
AC Programming Characteristics
TA = 25 ± 5°C, VCC = 6.5 ± 0.25 V, VPP = 13.0 ± 0.25V
Symbol
Parameter
Test
Conditions* (1) Limits
Min Max Units
tAS Address Setup Time 2 ms
tCES CE Setup Time 2 ms
tOES OE Setup Time 2 ms
tDS Data Setup Time 2 ms
tAH Address Hold Time 0 ms
tDH Data Hold Time 2 ms
tDFP
OE High to Output
Float Delay (2) 0 130 ns
tVPS VPP Setup Time 2 ms
tVCS VCC Setup Time 2 ms
tPW PGM Program Pulse Width (3) 95 105 ms
tOE Data Valid from OE 150 ns
tPRT
VPP Pulse Rise TIme During
Programming 50 ns
*AC Conditions of Test:
Input Rise and Fall Times (10% to 90%)..........20 ns
Input Pulse Levels...............................0.45V to 2.4V
Input Timing Reference Level...............0.8V to 2.0V
Output Timing Reference Level............0.8V to 2.0V
Notes: 1. VCC must be applied simultaneously or before VPP
and removed simultaneously or after VPP.
2. This parameter is only sampled and is not 100%
tested. Output Float is defined as the point where
data is no longer driven — see timing diagram.
3. Program Pulse width tolerance is 100  msec ±  5%.
Atmel’s 27C010/L Integrated
Product Identification Code
Codes
Pins Hex
A0 O7 O6 O5 O4 O3 O2 O1 O0 Data
Manufacturer 0 0 0 0 1 1 1 1 0 1E
Device Type 1 0 0 0 0 0 1 0 1 05
Rapid Programming Algorithm
A 100 ms PGM pulse width is used to program. The address
is set to the first location. VCC is raised to 6.5V and
VPP is raised to 13.0V. Each address is first programmed
with one 100 ms PGM pulse without verification. Then a
verification / reprogramming loop is executed for each address.
In the event a byte fails to pass verification, up to
10 successive 100 ms pulses are applied with a verification
after each pulse. If the byte fails to verify after 10
pulses have been applied, the part is considered failed.
After the byte verifies properly, the next address is selected
until all have been checked. VPP is then lowered to
5.0V and VCC to 5.0V. All bytes are read again and compared
with the original data to determine if the device
passes or fails.
AT27C010/L
3-159
tACC
(ns)
ICC (mA)
Ordering Code Package Operation Range
Active Standby
45 35 0.1 AT27C010-45JC 32J Commercial
AT27C010-45PC 32P6 (0°C to 70°C)
AT27C010-45TC 32T
35 0.1 AT27C010-45JI 32J Industrial
AT27C010-45PI 32P6 (-40°C to 85°C)
AT27C010-45TI 32T
55 35 0.1 AT27C010-55JC 32J Commercial
AT27C010-55PC 32P6 (0°C to 70°C)
AT27C010-55TC 32T
35 0.1 AT27C010-55JI 32J Industrial
AT27C010-55PI 32P6 (-40°C to 85°C)
AT27C010-55TI 32T
70 35 0.1 AT27C010-70JC 32J Commercial
AT27C010-70PC 32P6 (0°C to 70°C)
AT27C010-70TC 32T
35 0.1 AT27C010-70JI 32J Industrial
AT27C010-70PI 32P6 (-40°C to 85°C)
AT27C010-70TI 32T
90 35 0.1 AT27C010-90JC 32J Commercial
AT27C010-90PC 32P6 (0°C to 70°C)
AT27C010-90TC 32T
35 0.1 AT27C010-90JI 32J Industrial
AT27C010-90PI 32P6 (-40°C to 85°C)
AT27C010-90TI 32T
120 35 0.1 AT27C010-12JC 32J Commercial
AT27C010-12PC 32P6 (0°C to 70°C)
AT27C010-12TC 32T
35 0.1 AT27C010-12JI 32J Industrial
AT27C010-12PI 32P6 (-40°C to 85°C)
AT27C010-12TI 32T
150 35 0.1 AT27C010-15JC 32J Commercial
AT27C010-15PC 32P6 (0°C to 70°C)
AT27C010-15TC 32T
35 0.1 AT27C010-15JI 32J Industrial
AT27C010-15PI 32P6 (-40°C to 85°C)
AT27C010-15TI 32T
Ordering Information
3-160 AT27C010/L
tACC
(ns)
ICC (mA)
Ordering Code Package Operation Range
Active Standby
45 25 0.1 AT27C010L-45JC 32J Commercial
AT27C010L-45PC 32P6 (0°C to 70°C)
AT27C010L-45TC 32T
25 0.1 AT27C010L-45JI 32J Industrial
AT27C010L-45PI 32P6 (-40°C to 85°C)
AT27C010L-45TI 32T
55 25 0.1 AT27C010L-55JC 32J Commercial
AT27C010L-55PC 32P6 (0°C to 70°C)
AT27C010L-55TC 32T
25 0.1 AT27C010L-55JI 32J Industrial
AT27C010L-55PI 32P6 (-40°C to 85°C)
AT27C010L-55TI 32T
70 25 0.1 AT27C010L-70JC 32J Commercial
AT27C010L-70PC 32P6 (0°C to 70°C)
AT27C010L-70TC 32T
25 0.1 AT27C010L-70JI 32J Industrial
AT27C010L-70PI 32P6 (-40°C to 85°C)
AT27C010L-70TI 32T
90 25 0.1 AT27C010L-90JC 32J Commercial
AT27C010L-90PC 32P6 (0°C to 70°C)
AT27C010L-90TC 32T
25 0.1 AT27C010L-90JI 32J Industrial
AT27C010L-90PI 32P6 (-40°C to 85°C)
AT27C010L-90TI 32T
120 25 0.1 AT27C010L-12JC 32J Commercia
AT27C010L-12PC 32P6 (0°C to 70°C)
AT27C010L-12TC 32T
25 0.1 AT27C010L-12JI 32J Industrial
AT27C010L-12PI 32P6 (-40°C to 85°C)
AT27C010L-12TI 32T
150 25 0.1 AT27C010L-15JC 32J Commercial
AT27C010L-15PC 32P6 (0°C to 70°C)
AT27C010L-15TC 32T
25 0.1 AT27C010L-15JI 32J Industrial
AT27C010L-15PI 32P6 (-40°C to 85°C)
AT27C010L-15TI 32T
Ordering Information
Package Type
32J 32 Lead, Plastic J-Leaded Chip Carrier (PLCC)
32P6 32 Lead, 0.600" Wide, Plastic Dual Inline Package (PDIP)
32T 32 Lead, Plastic Thin Small Outline Package (TSOP)
AT27C010/L
3-161
This datasheet has been downloaded from:
www.DatasheetCatalog.com
Datasheets for electronic components.]]>CAPACITOR ELETROLITICO 20/100http://www.abtron.com.br/produtos/0,14422_CAPACITOR-ELETROLITICO-20-100.html
]]>PEB3465N V1.2http://www.abtron.com.br/produtos/0,14382_PEB3465N-V1-2.html
PEB3465H
Descrição Quádruplo analógico Pots-ic (QAP) em tecnologia CMOS não para Design
Empresa, fabrico Infineon Technologies Corporation.
Folha de dados Download de folha de dados PEB3465H Tamanho do arquivo: 255 kB

Características:

Descrição resumida do produto
PEB 31665/PEB 31666 (MuPP) PEB 3465 (QAP) PEB 4165/PEB 4166 (AHV-SLIC) circuito de Interface de linha de assinante Multi canal
O MuSLIC é um processador de sinal do 16 canal juntamente com conversores de quatro D/A de A/D de 4 canais e 16 único canal toque Slics. Este chipset integra a funcionalidade de BORSCH inteira para placas de linha analógica, baseado em um conceito DSP totalmente programável e, portanto, oferece flexibilidade de país diferente - e requisitos de linha com um único hardware. Aplicativos
s pedidos de cartão de linha analógica para
s inversão de polaridade (hard/soft) para s s
Recursos de Private Branch Exchange Office, rede de acesso, Central
Especificação de acordo com ITU-T s
Q.552 z interface, LSSGR s integrada toque - freqüência de toque sinusoidal programável (16,6 - 70 Hz) - anel programável amplitude (até 85 Vrms) - detecção de viagem dos toque da DC automática com limite programável - anel geração com zero injeção de passagem - nenhum anel retransmite s necessário apoio externo toque s totalmente digital programável DC-característica - programável constante atual de 0 - 50 mA
-Programmable resistivos valores de 0 - 2 x 800 - tensão constante programável s injeção de Teletax integrado programável e filtrando - programável até 10 Vrms no anel/ponta - fio de AHV-SLIC - freqüência programável (12/16 kHz) s programável digital codec de filtros para: Transhybrid - impedâncias - balanceamento - resposta em frequência - ganho - A-law, µ-lei, 16 bit modo linear s sofisticado suporte de software controlado teste integrado e funções de diagnóstico (ITDF) - testes de linha integrada - Loops para integrados à placa / circuito de testes - geradores integrado
telefones públicos Interface - paralelo microcontrolador de 8 bits de interface para Intel e Motorola - como os processadores (PEB 31666) - limiares programável do IOM interface ®-2 (PEB 31665); No gancho, fora do gancho, anel viagem detecção dois Slics disponível - Slic PEB 4166 com interruptor de bateria adicional para gerenciamento de energia - Slic PEB 4165 sem opção de bateria adicional cálculo de soma de verificação integradas para CRAM (AC e DC separados) longo loop capacidade motriz iniciar o terreno e iniciar o Loop possível transmissão no gancho
http://www.Siemens.de/Semiconductor/
Pacote de suporte e documentação
s 4 placa de avaliação do canal s Hard/Software referência manual s visão geral do produto s s coeficiente Software notas de aplicação
Smart 31666 ou Smart 31665 s canal 16 placa de avaliação com bordo controlador µ
MuSLIC processador Multi canal assinante linha Interface circuito MuPP multicanal para potes QAP Quad analógico POTS AHV-SLIC avançados de alta voltagem assinante linha circuito
Evolução do cartão de linha analógica
Indicado para uma placa de linha do canal 16
Alimentação de 16 Relay de 16 Relay inversão de polaridade de unidade 16 Relay acesso de teste 1 teste do anel inserção 16 CARIT 1 anel gerador 16 DC 16 12/16 kHz, monitoração / filtragem CODEC 16
Arquitetura de placa de linha analógica tradicional
16 HVSLIC
16 SLICOFI
]]>SMD BAT54http://www.abtron.com.br/produtos/0,14433_SMD-BAT54.html
]]>SG3843Mhttp://www.abtron.com.br/produtos/0,14414_SG3843M.html
]]>Localizaçãohttp://www.abtron.com.br/conteudo/0,1355_Localizacao.html
Exibir mapa ampliado]]>Quem Somoshttp://www.abtron.com.br/conteudo/0,1353_Quem-Somos.htmlNossa empresa tem atuação no mercado de componentes eletrônicos há mais 20 anos, temos como objetivo o fornecimento de produtos de alta qualidade com preços competitivos e agilidade, tendo assim, mais de 15.000 itens em estoque para pronta entrega.

Somos especializados em todo segmento de componentes eletrônicos do tipo PTH (DIP) e SMD , Tais como : Circuitos Integrados, Microcontroladores, Memórias , Microprocessadores , Diodos, Transistores, Tiristores, Cristais Osciladores e Osciladores Híbridos, assim como toda linha de componentes passivos (capacitores e resistores tanto em PTH ou SMD).

Trabalhamos com os maiores e melhores fabricantes de componentes eletrônicos no mercado mundial, proporcionando aos nossos clientes, alta tecnologia nos produtos oferecidos; bem como, dispomos de profissionais qualificados em soluções inteligentes para suprir todas as necessidades dos mesmos, no que refere-se aos problemas encontrados na execução de seus produtos.

Esta parceria e valoração de atendimento qualificado, traz boa performance de nossos clientes junto a concorrência. Fortalecendo os mesmos no mercado, podendo oferecer seu produto por um preço mais competitivo e de qualidade ímpar.

Ficamos situados no coração do maior centro eletrônico da América Latina, onde dispomos de parte de nossos estoques e para um atendimento personalizado a todos os nossos clientes que vem visitar-nos.

]]>Contate-noshttp://www.abtron.com.br/conteudo/0,1356_Contate-nos.htmlAbtron Comércio de Eletronicos Ltda
Rua dos Gusmões, 343 - 1º Andar - Santa Efigênia
CEP 01.212-001 - São Paulo - SP

Fone: (11) 3333-2758

e-mail: abtron@abtron.com.br

]]>Clienteshttp://www.abtron.com.br/conteudo/0,1354_Clientes.html